More Details About Frosted glass foil Mint
Frosted glass films are ideal for privacy protection or decoration of doors, windows or panes. They let the sunlight through and protect against annoying glances. Frosted glass film is often used on the ground floor of residential buildings, office entrances, bathroom windows or where views from the outside should not be so easy to get inside. They are also suitable as sun protection, as they block direct sunlight and provide a pleasant light.
Suitable for all smooth glass surfaces such as windows, shop windows, glass doors,...
-
Properties of frosted glass film:
- Soft PVC film, self-adhesive (0.08 mm)
- Running length: 50cm to 50 m
- width: 100cm
- Fire behaviour classification: DIN EN 13501-1
- matt with glitter effect
- stylish privacy screen
- for decorative purposes
- Protection from direct sunlight
- For long-term adhesion to glass surfaces
- Wet and dry bonding
Shipping options
2 - 4 days*
5 - 9 days*
Assembly of adhesive films
The fixing of the adhesive sheets is actually very simple. Of course it takes a little patience and you have to work carefully, but basically installation is not a problem without prior knowledge and is possible for everyone. To make sure nothing can go wrong, we have included detailed instructions in our help section.
Caution: before each installation, the substrate to be glued must be dry and free of dust, grease or other impurities that may compromise the adhesive strength of the material. For freshly painted substrates, ensure that the paint is dry or completely hardened. Before cleaning, also make sure that your surface is not discoloured or attacked in any way by the cleaning agent of your choice.
Technical Specifications
Thickness | 0.080 mm (without protective paper and adhesive) |
---|---|
Dimensional Stability (FINAT TM 14) | Bonded to glass, max. 0.1 mm. Shrinkage |
Tensile strength (DIN EN ISO 527) | Longitudinal: > 9 MPa transverse: > 9 MPa |
Elongation at break (DIN EN ISO 527) | Longitudinal: > 40% Transverse: > 40% |
Bond strength (FINAT TM 1) | glass:16 N/25 mm acrylic glass: 16 N/25 mm |
Adhesive | Solvent polyacrylate, permanent |
Temperature resistance | Glued to glass, -40° C to +90° C, no change |
Fire resistance (DIN EN 13501-1) | Only flame resistant (classification B - s1,d0) on glass with a gross density of ≥ 2250 kg/m³ (indoor application) |
Application temperature | > +8° C |
Service life by specialist application | 7 years (with vertical outdoor weathering & central European normal climate) |