Mounting instructions: Adhesive foil digital print Rectangular

Assembly & disassembly

Stick on adhesive foils / stickers correctly: Here you will learn how to attach a flat rectangular adhesive foil very easily.

Montage Klebefolie Schritt 1: Auspacken

1. unpacking

You will receive your foil rolled up, padded with bubble wrap in one package. Roll it out and lay it flat on a flat surface.

Montage Klebefolie Schritt 2: Vorbereiten

2. prepare

The adhesive film is placed on a backing paper. Smooth it out to avoid any bubbles or creases.

Montage Klebefolie Schritt 3: Vorbereiten

3. remove the foil

Now remove a piece of the adhesive film from the backing paper and fold the backing paper back a little.

Montage Klebefolie Schritt 4: Vorbereiten

4. position the foil

Fix the adhesive foil on one side at the corners in the position you have previously determined. Press a thin strip on the edge to make the adhesive film stick.

Montage Klebefolie Schritt 5: Folie anbringen

5. apply foil 1/2

Now stroke from top to bottom over the adhesive foil while you are removing the backing paper further and further from the adhesive foil.

Montage Klebefolie Schritt 6: Folie anbringen

6. apply foil 2/2

Continue with even pressure movements until the complete film is glued to the substrate.

Montage Klebefolie Schritt 7: Ecken und Ränder kontrollieren

7. check corners and edges

Check especially the edges and corners to make sure that the adhesive film is adhered here.

Montage Klebefolie Schritt 8: Blasen entfernen

8. remove bubbles

Your adhesive foil should now stick evenly to the surface without bubbles. Small bubbles can easily be punctured with a needle.

Montage Klebefolie Schritt 9: Fertig

9. ready

Your adhesive foil should now stick evenly to the surface without bubbles. Small bubbles can easily be punctured with a needle.