✓ delivered ready to install✓ fast production and shipping✓ Pay securely with paypal (incl. buyer protection)🌱 NEW: Eco-friendly & sustainable - PVC-free stickers with your design
Support Center

Please try first searching our frequently asked questions and help section.

« go back to faq category |go to support center

Mounting instructions: Adhesive foil digital print Rectangular

Stick on adhesive foils / stickers correctly: Here you will learn how to attach a flat rectangular adhesive foil very easily.

Montage Klebefolie Schritt 1: Auspacken

1. unpacking

You will receive your foil rolled up, padded with bubble wrap in one package. Roll it out and lay it flat on a flat surface.

Montage Klebefolie Schritt 2: Vorbereiten

2. prepare

The adhesive film is placed on a backing paper. Smooth it out to avoid any bubbles or creases.

Montage Klebefolie Schritt 3: Vorbereiten

3. remove the foil

Now remove a piece of the adhesive film from the backing paper and fold the backing paper back a little.

Montage Klebefolie Schritt 4: Vorbereiten

4. position the foil

Fix the adhesive foil on one side at the corners in the position you have previously determined. Press a thin strip on the edge to make the adhesive film stick.

Montage Klebefolie Schritt 5: Folie anbringen

5. apply foil 1/2

Now stroke from top to bottom over the adhesive foil while you are removing the backing paper further and further from the adhesive foil.

Montage Klebefolie Schritt 6: Folie anbringen

6. apply foil 2/2

Continue with even pressure movements until the complete film is glued to the substrate.

Montage Klebefolie Schritt 7: Ecken und Ränder kontrollieren

7. check corners and edges

Check especially the edges and corners to make sure that the adhesive film is adhered here.

Montage Klebefolie Schritt 8: Blasen entfernen

8. remove bubbles

Your adhesive foil should now stick evenly to the surface without bubbles. Small bubbles can easily be punctured with a needle.

Montage Klebefolie Schritt 9: Fertig

9. ready

Your adhesive foil should now stick evenly to the surface without bubbles. Small bubbles can easily be punctured with a needle.

« go back to faq category

further assistance needed?
further assistance needed?

If you are still having troubles feel free to contact us through our contact form or chat (if an agent is available)

Contact Support